Controller *1 Type-C Data Cable(1.5m)*1 User Manual *1

▶ Platform and System Requirements

● Switch Console
● PC with Windows 10 or higher
● Android 8.0 or higher
● iOS 13 or higher

▶ Product Layout

 Front

Top (Shoulder Key Section)

Back

 ▶ Operation Instructions 

▶ Indicator Light Status

Connecting Switch Tutorial

▶ Wired Connection Method

1. Directly connect the controller with the data cable and insert it into the SWITCH dock (SWITCH console mode), and wait for automatic connection. 2. Once the wired connection is successful, unplug the data cable, and the controller and console will automatically switch to wireless mode. If the wired connection fails, please check [Settings] → [Controllers and Sensors] → [Wired Connection for Pro Controller] → [Enable].

*If you need to directly connect to the SWITCH handheld console, you must prepare an OTG adapter or use a dual-headed Type-C data cable.

▶ Wireless Pairing Method

1. Click on the controller icon           on the Switch home page to enter the [Change Grip/Order] interface.

2. To operate the controller, press and hold the             +             buttons for 3 seconds to enter SWITCH controller mode. At this point, the channel light will display a slow running light effect.
3. Press and hold the             +             buttons for 3 seconds to enter pairing mode and wait for automatic connection. During this time, the channel light will display a fast running light effect. 4. When the controller icon appears on the game console screen, the connection is successful. For the next reconnection, simply press the             button.

Connecting PC Tutorial

▶ Wired Connection Method

Directly connect the controller with the data cable and insert it into the device's USB port, then wait for automatic connection. At this point, the channel light will be as shown in the picture. *If the wired connection to the PC fails, please check if the USB port's data transmission function is normal; *If the USB port/cable issue has been ruled out and the connection still fails, please confirm whether the device's operating system meets the requirements and whether the drivers are installed; *If the connection still fails, please contact official customer service for assistance.

▶ Bluetooth Connection Method (Requires Host to Support Bluetooth Functionality)

1. Open the device's Bluetooth list → Click on [Add Device] → Click on [Bluetooth] → Enter [Add Device] 2. Operate the controller, long press the                                +               button for 3 seconds to enter Xbox controller mode; the channel light will flash slowly at this time. 3. Long press the                +                button for 3 seconds to enter pairing mode; the channel light will flash quickly at this time. 4. Find "Xbox Wireless Controller" in [Add Device] and click to connect. Wait for the automatic connection to succeed.

Android Bluetooth Connection Tutorial

1. Open the device's Bluetooth list → Turn on [Bluetooth] 2. Operate the controller, long press the                               +                   button for 3 seconds to enter the Android-specific controller mode, at which point the channel light will flash slowly. 3. Long press the             +            button for 3 seconds to enter pairing mode, at which point the channel light will flash quickly. 4. In [Add Device], find "GEEKSHARE-Controller" and click to connect. Wait for the automatic connection to succeed. *This linking mode is necessary for App connection. Please refer to "App Download and Connection" for the connection method.

Android Wired Connection Tutorial

Simply connect the controller with a data cable and insert it into the device's USB port, then wait for automatic connection. *If the device only has a Type-C port, you need to prepare an OTG adapter or use a dual-headed Type-C data cable. *If the wired connection fails, please check if the device's USB port supports data transmission and confirm whether the system version is too low, which may cause the connection to fail. *If you have any other issues, please contact official customer service promptly.

iOS Bluetooth Connection Tutorial

1. Open the device's Bluetooth list → Turn on [Bluetooth] 2. Operate the controller, press and hold the                +               button for 3 seconds to enter Switch controller mode; at this point, the channel light will be in a slow flashing state. 3. Press and hold the             +                  button for 3 seconds to enter pairing mode; at this point, the channel light will be in a fast flashing state. 4. Find "Pro Controller" in [Add Device] and click to connect. Wait for the automatic connection to succeed. *This linking mode is necessary for App connection. Please refer to "App Download and Connection" for the connection method.

2.4G Adapter Connection Tutorial (Receiver Manual)

(The 2.4G adapter needs to be purchased separately; the receiver is only compatible with PC/Linux/Android devices) 1. First, insert the adapter into the device's USB port. At this point, the adapter's indicator light will flash slowly. 2. Operate the controller by pressing and holding the               +                     button for 3 seconds to enter the receiver controller mode. The channel light will flash slowly. 3. Press and hold the              +               button for 3 seconds to enter pairing mode. The channel light will flash quickly. 4. Press the switch on the adapter once. The adapter's indicator light will flash quickly, and then wait for the connection to be successful.

▶ Back Key Mapping/Macro Recording (The operation method for back key mapping and macro recording is the same)

The keys that can be recorded are: A/B/X/Y/L1/R1/L2/R2/L3/R3/D-Pad/Left and Right 8-Way Joystick

1. Press and hold               + Back Key (M1 or M2) for 2 seconds to enter recording mode. At this point, the controller's RGB light will flash slowly in white, and the controller will vibrate once as a prompt. 2. Within 30 seconds, sequentially input the desired keys. After completing the input, press the back key again to finish recording. 3. Back Key Mapping Clear Function: Press and hold                + the back key you want to clear for 2 seconds. The RGB light will flash slowly in white, and then press the back key again to clear it. The M1 and M2 keys must be operated separately for clearing.
*If only a single key is pressed once, it is determined to be a back key mapping. *If two or more keys are triggered, it is determined to be a macro recording. *During macro recording, the interval time between key triggers is related to the input speed. The faster the input, the quicker the triggers, and vice versa. *During gameplay, the macro function needs to be stopped after being activated; press the corresponding back key to do so. When the macro function is active, the controller keys can be triggered simultaneously with the macro. *A maximum of 32 commands can be recorded; if the limit is exceeded, it will automatically save and end the recording state. *The back key macro recording and key mapping functions support power-off saving.

▶ Rapid Fire Settings

The controller has two built-in settings for rapid fire: manual rapid fire and automatic rapid fire. The logical sequence is as follows: Normal Key Press → Manual Rapid Fire (White Light Flashes Twice) → Automatic Rapid Fire (White Light Flashes Three Times) → Normal Key Press (Green Light Flashes Twice)

Setting Method: 1. Press and hold                 + the key you want to enable rapid fire for 1 second. At this point, you will enter manual rapid fire mode (the rapid fire function is triggered only when the key is pressed). 2. Press and hold                   + the corresponding key for 1 second again to enter automatic rapid fire mode (once the automatic rapid fire is successfully set, you need to press the key manually to start it. If you want to pause the automatic rapid fire, you can also click the corresponding key).

▶ Vibration Adjustment

There are a total of 5 vibration intensity levels (0%/25%/50%/75%/100%), with the default set to 100%. 1. Press and hold the              +            key to increase vibration intensity. 2. Press and hold the               +            key to decrease vibration intensity. * Each time the vibration intensity is adjusted, the RGB light will flash twice as a prompt. * Once the vibration intensity is set to 100%, further increases will not change the vibration setting. * Vibration adjustments are saved even when powered off.

▶ Quick Trigger Settings

1. Press and hold the                +L1/L2 buttons to activate the quick trigger. The RGB light will flash red for 2 seconds as a confirmation. 2. Press and hold the                +L1/L2 buttons again to deactivate the quick trigger. The RGB light will flash green for 2 seconds as a confirmation. *The quick trigger function supports saving settings after shutdown. *The quick trigger settings require the trigger lock to be unlocked. 

▶ ABXY Key Swap

1. Press and hold the             +             button for 2 seconds to swap the key values of A and B, as well as X and Y on the controller. After a successful switch, the white light will flash slowly twice. 2. Press and hold the            +            button for another 2 seconds to switch back to the original state. After a successful switch, the rainbow light will flash slowly twice. * The swap settings are saved when powered off, and the configuration for each controller mode is saved independently.

▶ Joystick Mode Switch

The joystick mode is divided into dead zone mode and no dead zone mode. Press and hold the                + L3 button (left joystick pressed down) / R3 button (right joystick pressed down) for 3 seconds to enable the corresponding joystick's no dead zone mode. * The controller is set to dead zone mode by default from the factory. * The left and right joysticks need to be set individually. * The joystick mode switch supports saving when powered off.

▶ Lighting Effects:

Press and hold              , then push the left joystick to the right to cycle through the lighting effects: solid color → breathing → rainbow → gradient → off. Push the left joystick to the left to reverse the order. *There are a total of 5 states for the RGB lights: solid color (default), breathing, rainbow, gradient, and off.

▶ Brightness:

Press and hold               , then push the left joystick up to increase the brightness. Push the left joystick down to decrease it.
*There are five brightness levels: 0% / 25% / 50% (default) / 75% / 100%. *The brightness adjustment feature is only applicable to solid color, breathing, rainbow, and gradient lighting effects.

▶ Speed:

First, press and hold               , then press the left arrow key on the directional pad to slow down the light speed. Press the right arrow key to speed up the light speed. * The light speed is divided into five levels: Level 1 (slowest) → Level 2 → Level 3 (default) → Level 4 → Level 5 (fastest)

▶ Saturation:

First, press and hold              , then press the up arrow key on the directional pad to increase the light saturation. Press the down arrow key to decrease the saturation. * Saturation is divided into 5 levels: 0% (low) / 25% / 50% / 75% / 100% (highest) * The lowest level of saturation for all colors is white light.

▶ Color:

First, press and hold                , then rotate the right joystick in a circle to change the RGB light color. *Color modification only takes effect in single color and breathing modes. *This option cannot be adjusted when the light is turned off. *When rotating the right joystick, try to push it all the way down.

▶ Joystick and Trigger Calibration

1. Press and hold            ,              , and               for 2 seconds to enter the controller calibration mode. The RGB light will flash white slowly at this time. 2. Push the left and right joysticks all the way down and rotate them clockwise or counterclockwise 3 times, recording the maximum outer circle of the joysticks. 3. Press the left and right triggers all the way down 3 times, recording the linear recognition area of the triggers. 4. Finally, press                to exit. *The trigger lock must be open during controller calibration to ensure the trigger travel is at the longest setting. *During the calibration process, you can push the left/right joystick individually and press the left/right trigger individually, without needing to do them simultaneously.

▶ Calibration of Six-Axis Gyroscope

Ensure the controller is placed on a level surface, then press and hold the               +               button for 2 seconds. At this point, the RGB light on the controller will flash white and green. Once the controller calibration is complete, the RGB light will return to its original state.

▶ Soft Function Reset

In the powered-on state, press and hold the               and                buttons for 5 seconds to initiate a soft function reset of the controller. The RGB light will flash green twice during this process. * The macro mapping, rapid fire, dead zone, vibration, lighting settings, button swapping, and automatic mode recognition of the controller will all be reset. * The pairing information of the controller will be retained and will not be cleared.

▶ Controller Reset (Factory Reset) Please do not perform a controller reset unless absolutely necessary.

1. First, prepare a needle with a diameter of ≤1.5mm and a length of >5mm (you can straighten a paperclip). 2. Then, aim at the small hole at the bottom of the back of the controller and press down. When the reset is successful, the controller will vibrate once as a prompt. *After the controller reset, calibration will be forcibly cleared. To use the controller normally, you must calibrate it once. *The controller reset will clear all paired devices, and you will need to re-pair them.

▶ Precautions

To ensure that every player can safely and efficiently enjoy our game controller while extending its lifespan and enhancing their gaming experience, we provide the following electronic safety precautions. Please read and comply carefully: ● Supervision of Minors: Minors should use this controller under the close supervision of parents or guardians to prevent safety hazards caused by improper operation. We encourage parents to educate and guide their children on the correct use of electronic products and to always pay attention to their gaming behavior.
● Keep Away from Fire and High Temperatures: It is strictly prohibited to expose the handle to open flames or high-temperature environments to avoid potential fire hazards or equipment damage. Please ensure that the handle is kept away from any heat sources to ensure safe usage.
● Environmental Disposal and Recycling: When your game controller reaches the end of its lifespan or needs to be replaced, please dispose of it according to local waste classification standards to help maintain a clean environment.
● Compliance in Use and Prohibition of Modifications: Please strictly follow the instructions in the user manual to use this handle correctly and charge it within the compliant electrical specifications. Any unauthorized disassembly, modification, or repair may result in safety accidents or equipment failure, for which we will not be held responsible.
● Cleaning and Maintenance: The surface of this handle can be gently wiped with a slightly damp cloth or paper towel. Do not immerse the handle directly in water or rinse it with water to avoid damaging the internal circuits.
● Reasonable Usage Time: To protect your health, please do not use this handle continuously for long periods. If you experience dizziness, hand fatigue, or other discomfort, please stop using it immediately and take a proper rest.
● Regular Inspection: Please regularly check the cable, connectors, and other components of the handle for any damage. If any damage is found, please replace it in a timely manner.
● Long-term Storage Recommendations: If you do not plan to use this handle for an extended period (several months to over a year), please ensure that the device is sufficiently charged to avoid being unable to power on due to battery depletion. Before using it again, please charge the device to a power-on state.
● Battery Safety: Please use the original or certified charger to charge the handle to avoid overheating or damaging the battery.
● Electrostatic Protection: During dry seasons, be aware of the potential impact of static electricity on the handle's circuitry and take appropriate anti-static measures.
● Avoid Drops and Impacts: Please handle the handle gently to avoid severe drops or impacts that may damage the internal structure. Do not use the handle as a weight or to strike other objects to prevent damage to the device or personal injury.
● Usage Environment Requirements: Please avoid using the handle in harsh environments (such as areas with excessive dust, strong magnetic interference, or high humidity) to prevent affecting product performance and shortening its lifespan.
● Troubleshooting and Consultation: Please follow the safety warnings and precautions outlined in the product manual. If you encounter any issues or malfunctions during use, please contact our official customer service team immediately. We are dedicated to providing you with technical support and solutions.
We are committed to offering you safe, reliable, and high-quality game controller products, and we look forward to your continued support and trust. If you have any questions or suggestions, please feel free to reach out to us.

▶ Names and Contents of Harmful Substances in Products

This table is prepared in accordance with the provisions of SJ/T 11364.

"O" indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit requirements specified in GB/T 26572-2011. "X" indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the limit requirements specified in GB/T 26572-2011.

▶ Warranty Card

* Non-human damage can be exchanged for a new one within one year without repair. For specifics, please contact official channels or customer service. * Damage caused by human factors and beyond the warranty period can be exchanged for a new one through a paid method.